1 Power can’t be Turned On After Connecting Vehicle Diagnostic Socket?
Possible Cause: Check whether the diagnostic port have 12V power supply voltage; whether the connection between diagnostic main cable and connector of main unit is ok; check whether vehicle battery voltage is higher than 10V; whether main cable diagnostic connector have any damage or breakdown etc.
Solution: Check vehicle system voltage and main cable diagnostic connector.
2 Automotive diagnostic scanners Screen Doesn’t Display Except Backlight After Startup
Possible Cause: the power connection don’t touch well
Solution: ShutDown and repeat Pluging / Unpluging the power supplier, StartUp again after 1 second.
3 Automotive scanners Screen Displayed Abnormally After StartUp
Possible Cause:SDCard isn’t inserted well;SD card program damage; Supply voltage is too low
Solution: Take out SD card and insert again; Download SD card upgrade program: Checking the supply voltage
4 Auto diagnostic scanners Screen Displayed “SD Card Can’t Be Detected” After Startup
Possible Cause: SDCard is dirty with oil, or oxidation, also damage by upgrade incorrectly.
Solution: Wipe SD Card in a little alcohol with cotton tipped applicator; Change new SD Card
5 Screen Flickers or Not Enough Bright After Startup
Possible Cause: Vehicle power voltage is not stable or the voltage is too low, the supply is not enough for the automotive scannersmain unit.
Solution: Check the Battery power and circuit.。
6 Can’t Input Data After Opening Soft Keyboard
Possible Cause: Touch screen is not accurate to adjust; the cursor location where is not editing.
Solution: Adjust the auto scanner touch screen again; Use the touch pen to click the editing part, if the cursor is flickering, means it is editing
7 Screen Doesn’t Respond or Responds Wrongly When Touch Stylus Click
Possible Cause: The automotive diagnostic scanners touch screen need adjust again(Note: you need adjust the screen after
SD card upgrade every time)
Solution:  the detail information Ref: “3.4  Screen Adjustment”
8 The Tested Result Can’t be Printed Out or Printed Unclearly
Possible Cause: Lack of the print paper; Mounting paper incorrectly or reversely;
Solution: Update the high quality heat sensitive paper and take out the paper and mount it again.
9 Unable To Enter The Failure Diagnosis Program
Possible Cause: SD Card internal program failure;SD Damage
Solution: Upgrade SD Card diagnostic program again; Change SD Card
10 Displayed “Authorization Doc.Error, Pls Contact Dealer” When Diagnose
Possible Cause: The SN in SD Card and Main Unit are not matched
Solution: Download the relevant main unit diagnostic program, and make sure the correct software upgrade following the operation instruction.
 
 
 
 
Some Links
Why Choose Us
Strict marketing control policy
Heavy duty truck diagnosis leading brand
Professional R& D team and local technical support service
Management experience and Powerful  industry relationships